Philips HX5610-04 - Manual (Page 18)

7 Insert the screwdriver underneath the
electronic circuit board in multiple places.
8 Twist and pry the electronic circuit board
loose until it is completely separated from the
handle.
9 Pry the 2 AA-sized cylindrical nickel metal-
hydride batteries loose by inserting the
screwdriver on the sides of the two batteries
in the locations shown in the figure.
10 Use a twisting and prying motion to break the
glue bond around the batteries. The 2 batteries
are joined together with glue and will be lifted
out together.
EngliSh 18