Philips 20PS47S - Manual (Page 29)

R
EMOTE
U
SE
- S
EARCH
M
ETHOD FOR
A
CCESSORIES
26
T he Search Method of programming
your remote can take as long as 12
minutes to perform so we recommend you
use it as a last resort.
Please read all the steps below before
beginning.
1 Press the POWER button on the
device your are attempting to pro-
gram to turn it ON.
2 If programming a VCR or DVD
type product that has a STOP play
command, place a VCR Tape or
DVD disc into the device. Press the
PLAY button.
3 Place the TV/VCR/ACC Mode
Switch in the proper position. VCR
for programming Video Cassette
Recorders or ACC for all other
accessory devices.
4 Press the VCR • RECORD and
the AUTO SOUND buttons simul-
taneously and hold them down.
As you continue to hold down but-
tons, the remote will run through its
programmed code list with a com-
mand for the VCR or DVD to
STOP play. Or, for Cable Boxes and
Satellite Receivers the command
will be to CHANGE CHANNELS.
5 When the STOP command hap-
pens release the two buttons.
Or for Cable Boxes and Satellite
Receivers, as soon as the channel
changes ONCE, IMMEDIATE-
LY release the two buttons.
07
08
07
08
STOP
STOP
STOP
STOP
VOL
3
4
4
5
4
1
3
5
Digital Device (DVD)
Cable Box
Satellite System
VCR