Philips HD8773-47 - Manual

Open lid and use handle to remove water tank. To use without
water filter, rinse tank with water. Fill with fresh water up to
MAX mark. Place water tank into machine. To install water filter
see user manual.
NOTE: Only use cool fresh water, any other liquid may cause
damage.
Open coffee bean hopper lid. Slowly pour beans into hopper.
Replace lid.
NOTE: Only use coffee beans. Ground, instant and flavored
coffees may damage the machine.
QUICK START GUIDE
MINUTO CARAFE
HD8773/47
SET UP
PLEASE NOTE: OUR MACHINES ARE TESTED WITH
COFFEE AT THE FACTORY TO ENSURE HIGH
QUALITY STANDARDS. WHILE MACHINES ARE
CLEANED THOROUGHLY AFTER TESTING, IN
SOME CASES, COFFEE GROUNDS MAY REMAIN IN
THE MACHINE.
FOR FULL INSTRUCTIONS, PLEASE REFER TO THE
USER MANUAL
 1
BEFORE FIRST USE
 2
Switch power button on back of machine
to the “I” or ON position.
Turn machine on by pressing “ ” button
on control panel.
 2
 1
CONTROL PANEL QUICK REFERENCE
For a full understanding of functions, see the user manual.
24. Espresso brew button
25. Medium Coffee brew button
26. Long Coffee brew button
27. Cappuccino brew button
28. "Aroma" - Pre-ground
coffee button
29. Menu button
30. ON/OFF button
TROUBLE SHOOTING
Q: Why isn’t my coffee coming out hot enough?
A: The beverage temperature setting may be too low. Adjust the beverage
temperature setting to Normal or High.
A: Cups may be cold. Preheat cups with hot water prior to dispensing coffee.
Q: Why is my coffee coming out so weak?
A: The machine automatically adjusts itself after brewing a few cups of coffee to
optimize the extraction of the coffee to the compactness of the ground coffee.
We recommend brewing 3-5 espressos before drinking to allow for this
adjustment process. Refer to the "Saeco Adapting System" in the user manual
for more information.
A: The coffee may be too coarse. Change the coffee blend or adjust the grind. Finer
coffee grounds result in stronger tasting coffee. Refer to the “Adjusting the ceramic
coffee grinder” in the user manual for more information.
Q: Why is my machine leaking water/coffee?
A: Sometimes water is drained automatically by the machine into the drip tray to
manage the rinsing of the circuits and ensure optimum machine performance.
A: The dispensing spout may be clogged. Clean the holes in the dispensing spout.
Q: Why isn’t the machine filling up my cup?
A: The machine’s coffee lengths can be programmed. Enter the beverage
programming menu and adjust the coffee length setting to your liking for every
beverage. See "Adjusting the coffee length" sections in the user manual.
For more troubleshooting please refer to the User Manual.
NEED ASSISTANCE:
If you have any questions or concerns, we are always available to assist you. Please
call us direct at 1-800-933-7876
or visit us at www.philips.com/saeco
2/2014 421946005561
24 27
25 28
26 29
30