Philips CAM102SB-00 - Manual (Page 16)

16
Why do my video/pictures look blurry?
• Hold the camcorder steady in your hands
during shooting.
• During video capture, do not move the
camcorder too fast.
• Use a tripod (not supplied) if necessary.
Why do my video/pictures look distorted on a
TV screen?
• Select the correct TV system.
How do I charge the camcorder?
• You can charge the camcorder via the USB
pop-out connector. When you connect
it to your PC/laptop it will automatically
charge. You can also plug the camcorder via
the pop-out USB into a USB charger.
How long do I have to charge the camcorder?
• The camcorder is fully charged for first
usage. The camcorder charge time when
connected to your PC/laptop is 3 hours.
When you charge it via USB adaptor, the
charge time is 2 hours.
Where can I find an adaptor for CAM102B to
charge the battery?
CAM102B can be charged via regular USB
adaptors, which are readily available in
electronic stores. CAM102B is also compatible
with iPhone adaptors.
How do I fast-forward or rewind on the
camcorder?
• You can fast-forward during play of a movie
by pressing the right-button for 2 seconds.
You can rewind during play of a movie by
pressing the left-button for 2 seconds.
Camcorder stopped responding?
• In the unlikely event that your camcorder
stops responding, you can manually reset
it. The reset button is located under the
HDMI cover. There you see a small opening
above the HDMI connection. Please use
a small prying object (like a pen) to insert
and press gently for resetting. After you
have reset the camcorder, please turn on
the camcorder again, and set-up will start
again.
7 Frequently
asked questions
(FAQ)
Why is there no response when I use the
camcorder?
• The camcorder is in power-off mode. Turn
on the camcorder (see ‘Get started’ >
‘Turn on’).
• The built-in battery may be drained.
Charge the battery (see ‘Get started’ >
‘Charge the built-in battery’).
Why is [Memory full!] displayed when I try to
record?
• Ensure that the Micro SD card has been
inserted correctly (see ‘Get started’ >
‘Load the Micro SD card’).
• The memory is used up. Save your video/
pictures to a computer (see ‘Use more of
your camcorder’ > ‘Transfer video/pictures
to a PC/Mac’). Then delete files from your
camcorder or clear the memory.
How much memory is needed for 1 hour of
Full HD recording?
• The camcorder uses 4GB on average
for 1 hour of Full HD video. For a more
complex video recording (e.g. with lots of
motions in the video, or a lot of panning),
the camcorder will use more memory. This
is done to maintain the video quality, but
will increase the usage of memory.
Why do I have no access to folders on the
camcorder from my computer?
• Ensure that the USB connection is correct.
• The camcorder turns off automatically
15 minutes after it is connected to a
computer. You can press to turn it on
again.
EN