Philips 32PFL3605-12 - Manual (Page 11)

9
Switch channels
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
•
Numeric buttons.
Press
• OK to use the channel grid.
Press • BACK P/P on the remote
control to return to the previous channel.
Note
When you use a favourite list, you can only •
select those channels in the list (see ‘Select a
favourite list’ on page 15).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1
Press OK.
The channel grid appears.
»
2
Press to select and preview a
channel.
3
Press OK to watch the selected channel.
4 Use your TV
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
To switch on
If the standby indicator is off, press •
(Power) at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press • (Standby-On) on the remote
control.
The standby indicator switches to red.
»
To switch off
Press • (Power) at the side of the TV.
The standby indicator switches off.
»
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
English
EN