Philips AJL308-17B User Manual

Page 6

Advertising
background image

Sleep

The clock radio has a built-in sleep timer,
which enables the set to automatically turn
off sound during radio or music playback
after a set period of time.

Option 1:

1 Press TUNER.
2 Press SLEEP until your desired sleep option

is displayed.
➜Radio will turn on if radio was previously

turned off.

Option 2:

1 Press CLOCK or PHOTO/VIDEO to

enter respective mode.

2 Press MENU.
3 Press

1 2 to highlight “General”.

4 Press

34 to select “Sleep Timer Music”.

5 Press

1 2 to select specific music you like.

➜The set will turn on with the music you

select.

Option 3: using USB/Memory card
(SD/MMC)

1 Repeat steps 1-8 described in “Listening to

music”.

2 Press SLEEP until your desired sleep option

is displayed.

To deactivate sleep function
When sleep is activated,

is display.

Press

SLEEP until “Off ” is displayed.

Illumination brightness

The LCD brightness can be adjusted
manually and automatically.

Manually adjusting

Press

REPEAT ALARM /

BRIGHTNESS

CONTROL

once or more to cycle screen

brightness through 4 levels.

Automatically adjusting
To avoid strong light emitting from the unit at
night time, the auto dim function can be used
to adjust the brightness to the lowest level
automatically.

1

Press

MENU.

2

Press

1 2 to highlight “General”.

3

Press

34 to select “Auto Dim Timer”.

4

Press

1 2 to select “On”.

5

Press

34 to select “Auto Dim - Start”.

6

Press

1 2 to select the time that auto dim

will start.

7

Press

34 to select “Auto Dim - End”.

8

Press

1 2 to select the time that auto dim

will end.

When auto dim is set, during auto dim time
span, the LCD brightness will be auto
adjusted to the lowest level. Press any
button to increase the brightness and it will
last 10 seconds.

Using the stand

The set is equipped with a stand on the
bottom panel. To set the set for a different
viewing angle take the stand out, then place it
back by reversing (see the figure below) the
side of the stand.

Sleep / Illumination

Setup

Option

Description

Language

English/Français/Deutsch/Español

Select a desired on screen display
language

Brightness

-3~3

Select a brightness value

Auto Dim Timer

Off/On

Turns on or off auto dim for LCD
brightness.

Auto Dim - Start

9: 00 PM

Set the start time for auto dim

Auto Dim - End

7: 00 AM

Set the end time for auto dim

Wall Paper

Blue/Green/Red/Purple

Select different color for LCD
background

Sleep Timer Music

3 music files are preset

Select one file for sleep function

Picture Display

Slideshow mode/Browse mode

Select different mode to display picture

Slideshow Sequence

Sequential/Random

Select different slideshow sequence

* Slideshow Effect

None/Random /16 effects available

Select different slideshow effects

Display Format

Wide screen/Normal

Select picture display format

Slideshow Frequence

5 Seconds/10 Seconds/ 30 Seconds/
1 Minute/ 5 Mintues/30 Minutes
1/ Hour/ 2 Hours

Select different slideshow intervals

File Information Display Off/On

Turns on or off file name display

Video Display

Playback Time/Remain Time

Select different video time to be
displayed

Press OK to restore to the factory
default settings.

Restore Default
settings

Reset

DivX VOD

Press OK to get DivX registration
code.

Using Setup menu options

The setup menu offers you advanced fea-
tures.

1

Press

MENU.

➜The menu appears.

2

Press

1 2 to select “General”.

3

Press

3 4 to select an item.

4

Press

1 2 to select an option under the item.

4

After finishing the setting, press

CLOCK,

TUNER, PHOTO/VIDEO or MUSIC to
exit the setup menu.

Setup menu

* = To turn on slideshow effect, you must select slideshow mode in “Picture Display”.

ifu_ajl308_eur_eng_37 19/9/07 15:09 Page 6

Advertising
This manual is related to the following products: