Philips 20RF50S - Manual (Page 7)

75 ⍀
L
AUDIO
R
AV out CVI AV in
VOL
24
CVI
AV
AUDIO OUT
L R S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
3 4
5
7
6
2
7
T he TV’s audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV in Jacks located on the back of
the TV.
1 Connect the VIDEO (yellow) cable to
the VIDEO AV in jack on the back of
the TV.
2 Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV in jacks on the rear of the TV.
3 Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
4 Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5 Turn the VCR (accessory device) and
the TV ON.
6 Press the AV button on the remote
control to select the AV channel. AV
will appear in the upper left corner on
the TV screen.
7 With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the television.
U
SING THE
AV
IN
(I
NPUT
) J
ACKS
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AV, CVI Input
Jack connections.
c c C
HECK
I
T
O
UT
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
VIDEO IN
(YELLOW)
BACK OF VCR
NOTE: Repeatedly pressing the AV button on the remote control will toggle the
picture source from the current channel, the AV channel, then the CVI channel.
BACK OF TV