Philips 9P5511C - Manual

S
ET
-U
P AND
Q
UICK
U
SE
G
UIDE
T
ABLE OF
C
ONTENTS
Getting Started
Warning/Precautions..................................1
Hooking Up Your TV ................................................1
How to Use the First Time Set-Up ...........................2
Basic TV and Remote Control Operation .................3
How to Use the On-Screen Menu Controls...............4
12 1
2
3
4 5 6 7 8
9
10 11
• For details on product registration, warranty, and
service refer to the other literature included with your
TV information packet.
Please retain all these materials and keep them handy
for future reference.
REAR SURROUND SPEAKERS
VIDEO OUT
AUDIO OUT
+ – + – R L
L R
FIXED VAR
ANT A/CABLE 75 ⍀ UHF/VHF
Y
INPUTS
PB
PR
S-VIDEO
VIDEO
AUDIO
AUX 1 AUX 2 R
L
IN
OUT
VIDEO OUT
AUDIO OUT
L R
FIXED
VAR
ANT A/CABLE
75 ⍀ UHF/VHF
INPUTS
VIDEO
AUDIO
AUX 1 AUX 2
R
L
Y our Cable TV input
into your home may be
a single (75 ohm) cable, or
a Converter Box installa-
tion. In either case the
connection to the TV is
very easy. Just put the
threaded end of the cable
signal to the TV's antenna
plug and screw it down
tight.
C
ABLE
TV
C ABLE I NPUT /C ONVERTER
REAR SURROUND SPEAKERS
VIDEO OUT
AUDIO OUT
+ – + – R L
L R
FIXED VAR
ANT A/CABLE 75 ⍀ UHF/VHF
Y
INPUTS
PB PR S-VIDEO
VIDEO
AUDIO AUX 1 AUX 2 R L
OR
OUT TO TV IN FROM ANT.
T he basic Antenna, or
Cable TV, to VCR to
TV connection is shown to
the right. For more infor-
mation on other hookups
(possible when Cable
Converter/Descrambler
boxes are included) refer
to your accessory VCR
and Cable Converter
Owner's Manual for
details.
VCR
TO
TV
B ASIC C ONNECTION
If your Cable TV sig-
nal is a single round cable (75
ohm) then you're ready to con-
nect to the TV.
If you have a Cable TV
Converter Box:
Connect the Cable TV signal to
the Cable Signal IN(put) plug
on the Converter.
Connect the Cable TV
cable to the ANTENNA plug
on the TV.
If you have a Cable TV
Converter Box:
Connect the OUT(put) plug
from the Converter to the
ANTENNA plug on the TV
(connecting cable supplied with
the Converter).
2
BEGIN
1
Connect your
Antenna or Cable TV signal
to the IN FROM ANT(enna)
plug on the VCR.
Connect the OUT TO TV
plug on the VCR to the
ANTENNA plug on the TV
(connecting cable supplied
with the VCR).
2
BEGIN
1
Back of TV
Round Cable
75 Ω Ohm
Cable TV Converter
Box Connection
Cable TV
Company
Remember,
set the TV for the
type signal you've
just connected (see
page 2 of this Set-
Up Guide.)
Your TV can set
itself to select only
the channel numbers
on your Cable sys-
tem (see “Setup"
page 2). If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
S MART
H ELP
Cable TV Signal
STOP
Round Cable
75 Ω Supplied with VCR
VCR
Outdoor VHF/UHF
Antenna
300 to 75 Ω Ohm
Adapter
Cable TV signal
Back of TV
Refer to the Owner's
Manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
3
STOP
OR
REAR SURROUND SPEAKERS
VIDEO OUT
AUDIO OUT
+ – + – R L
L R
FIXED VAR
ANT A/CABLE 75 ⍀ UHF/VHF
Y
INPUTS
PB PR
S-VIDEO
VIDEO
AUDIO
AUX 1 AUX 2 R L
VIDEO OUT
AUDIO OUT
L R
FIXED
VAR
ANT A/CABLE
75 ⍀ UHF/VHF
INPUTS
VIDEO
AUDIO
AUX 1 AUX 2
R
L
A combination (outdoor
or indoor) antenna
receives normal broadcast
channels 2-13 (VHF) and
14-69 (UHF). Your con-
nection to such an antenna
is easy since there is only
one antenna plug (75
Ω
-
ohm) on the back of your
TV - and that’s where the
antenna goes.
A NTENNA
O UTDOOR /I NDOOR
Remember,
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "SETUP"
on page 2 of this
Guide.)
To order any
optional accessory
contact your dealer
or call the toll-free
accessory ordering
number (1-800-851-
8885).
S MART
H ELP If your antenna has a
round cable connector (75
ohm) on the end, then you're
ready to connect it to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter.
Push the round end of the
adapter (or antenna) onto the
ANTENNA plug on the rear of
the TV. If the round end of the
antenna wire is threaded, screw
it down tight.
2
STOP
300 to 75 Ω
Adapter
(483521827003)
Twin Lead
Wire
Back of TV
BEGIN
1
Note: For homes with separate UHF and VHF anten-
nas you will need an optional combiner to connect to
the TV.
VHFVVHF
UHF
300 Ω
75-300
Ω ADAPTER
OR
REAR SURROUND SPEAKERS
VIDEO OUT AUDIO OUT
+ – + – R L
L R FIXED VAR ANT A/CABLE 75 ⍀ UHF/VHF
Y
INPUTS
PB PR S-VIDEO VIDEO AUDIO AUX 1 AUX 2 R L
U/V Combiner
75-300 Ohm Adapter
Round Cable
75 Ω Ohm
Combination VHF/UHF Antenna
(Outdoor or Indoor)
Back of TV
Projection Television and Remote Control
OR
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
NOTE: This owner's manual is used with several different
television models. Not all features (and drawings) dis-
cussed in this manual will necessarily match those found
with your television set. This is normal and does not
require you contacting your dealer or requesting service.
1 - 3135 015 15241