Philips MZ33 - Manual (Page 10)

10
MZ-3 / 37 page 10
English
CONNECTIONS
AUX IN
You can connect the audio left and right OUT terminals of
another sound system, e.g. CDR, tape to the corresponding
left and right AUX IN terminals at the rear of the set.
• Use the MZ-33 sound controls to adjust the sound of the
other system.
• For playback of a connected CD-R(W), select the
CD-R(W) source.
LINE OUT (not for CDR-W)
You can connect the LINE IN terminal of a DAT or tape
recorder to the LINE OUT terminal at the rear of the set.
• Adjust the sound with the controls of the other system.
• When recording with a CD-R(W), select the CD source
on the MZ-33.
DIGITAL OUT (CD mode only)
You can connect the DIGITAL IN terminal of a CD-R(W) or
an external DAC player to the DIGITAL OUT terminal at
the rear of the set.
• When recording with a CD-R(W), select the CD source
on the MZ-33.
• For playback of a connected CD-R(W), select the
CD-R(W) source.
BASIC FUNCTIONS
Switching on
There are 3 ways to switch the set on:
• press y STANDBY/ON on the set and the last selected
source switches on;
• press SELECT SOURCE on the set and the last selected
source switches on;
• press CD, TUNER, CDR or AUX on the remote control.
To switch the set to standby, press y STANDBY/ON once
on the set (y on the remote control).
– The volume level, interactive sound settings, last
selected source and tuner presets will be retained in the
set's memory.
Adjusting volume and sound
1 Turn the VOLUME control anti-clockwise to decrease or
clockwise to increase volume on the set (or press
VOLUME –, + on the remote control).
™ Display shows the volume level VOL and a number
from 0-32.
2 Press DBB, INCR.SURR or DSC on the remote control
once or more to select the desired sound effects:
,
and
OPTIMAL (no indication) /CLASSIC ( ) /JAZZ ( )
/POP ( ) /OPTIMAL ... .
Notes:
– The effect of INCREDIBLE SURROUND may vary with
different types of music.
– You can also select the desired sound effects from the
set (See Using the SOUND CONTROL)
3 Press MUTE on the remote control to interrupt sound
reproduction instantly.
– Playback will be continued without sound and the
display shows MUTE.
4 To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
DBB
CD
SHUFFLE PROGRAM
DBB
IO IO
IO II
IO II
IO II
IO II IO IO I II
OPEN
CLOSE
PRESET
TUNING
MZ 3 COMPACT A UDIO SYSTEM IO IO
IO II
IO II
IO II
IO II IO IO I II
OPEN
CLOSE
PRESET
TUNING
LINE out
R L
DIGITAL
out
XP MZ-33 /37 08-05-2000 16:49 Pagina 10