Set sleep timer, Adjust brightness, Play from an external device – Philips ORD2100B-37 User Manual
Page 10

10
EN
• To stop alarm, press the corresponding
AL1/AL2.
»
The alarm repeats ringing for the next
day.
Note
•
When alarm sounds, you cannot adjust volume by
rotating the knob.
Snooze the alarm
When alarm sounds, press SNOOZE.
»
The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
Press SLEEP on the back of the device
repeatedly to select the sleep time period (in
minutes).
»
When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF](off) appears.
Adjust brightness
Press BRIGHTNESS repeatedly to adjust the
brightness of the display panel: high, medium,
or low.
15 30 60 90 120
OFF
Play from an external device
1
Connect an MP3 link cable (not supplied)
to:
• the AUDIO IN socket at the back of
this unit.
• the headphone socket of an external
device.
2
Start to play the device (see the user
manual of the device).
Note
•
The device switches to AUX mode automatically when
an external device with audio output is connected.
SNOOZE
BRIGHTNESS