Philips AZ106517 - Manual (Page 10)

RECORDING
15
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording, use NORMAL
type cassettes (IEC I) on which the tabs have not been broken.
• The best recording level is set automatically. Altering the
VOLUME and DBB controls will not affect the recording in
progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. To record over this
side again, cover the tabs with a piece of adhesive tape.
SYNCHRO START CD RECORDING
1. Select CD source.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN
9/ to open the cassette door.
4. Insert a suitable cassette into the cassette deck and close the
cassette door.
5. Press RECORD
0 to start recording.
– Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the CD
player separately.
To select and record a particular passage
• Press SEARCH
∞ or §. When you recognize the passage you
want, release SEARCH controls.
• To interrupt CD playback press PLAY/PAUSE 2; (on the
remote control
2;).
– Recording will begin from this exact point in the track when
you press RECORD 0.
6. For brief interruptions press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN
9/.
AZ 1065 /17 page 15
English
AZ 1065 /17 page 15
RECORD PLAY
SEARCH
STOP-OPEN PAUSE
DBB
POWER
TUNER
DYNAM IC BASS BOOST
CD TAPE OFF
AZ 106 5 CD RAD IO CASS ETTE RE CORDER
SHUFFLE ALL
VOLUME
PROG.
BATT LOW
MODE TAPE
TUNER
CD
STOP
PLAY•PA USE
SEARCH • • •
• • • SEA RCH
DIGIT
AL BA
SENSOR
1
XP AZ 1065/17 20-10-2000 12:30 Pagina 15