Philips AEA3000-00 - Manual (Page 7)

5
English
EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Install/replace microphone
batteries
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
•
Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent
type.
•
Batteries contain chemical substances, so they should
be disposed of properly.
1
Open the battery compartment and take
out the battery cartridge.
2
Insert 3 x AAA batteries (supplied) into
the cartridge with correct polarity (+/-) as
indicated.
3
Push back the battery cartridge, then close
the battery compartment.
Note
• If you are not going to use the microphone for a long
time, remove the batteries.
• New batteries installed in the microphone support up
to 30 hours of continuous use.
•
When the power indicator flashes red, it indicates that
the power level is low and you need to replace the
batteries.