Switching camera angles, Black level, Noise reduction – Philips Blu-ray home theater system HTS3106 User Manual
Page 31
EN - 31
EN
•
The sound mode cannot be changed during playback of
discs not recorded in multiple audio mode.
•
Some discs allow changing the audio language setting on
the disc menu. (Operation varies depending on the
discs. Refer to the manual accompanying the disc.)
•
Switching audio soundtrack may not work on some
discs with multiple audio streams or channels (e.g.
DVDs that allow changing audio setting on the disc
menu).
•
If the disc has no audio language, “Not Available” will be
displayed on the TV screen.
•
For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
8.13. Switching Camera Angles
Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You can
change the camera angle when
appears on the TV
screen.
1. During playback, press [OPTION] to display the play
menu.
2. Use [
] to select “Angle”, then press [OK].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
3. Use [
] to select your desired angle.
4. Press [BACK
] to exit.
D Note
•
If “Angle Icon” setting is set to “Off”,
will not
appear on the TV screen. (refer to page 35)
8.14. Black Level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
1. During playback, press [OPTION] to display the play
menu.
2. Use [
] to select “Black Level”, then press [OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK
] to exit.
D Note
•
The setting will remain the same even if the unit is
switched to standby mode.
•
“Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.
8.15. Noise Reduction
Reduces the noise of the playback picture.
1. During playback, press [OPTION] to display the play
menu.
2. Use [
] to select “Noise Reduction”, then press
[OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK
] to exit.
D Note
•
The setting will remain the same even if the unit is
switched to standby mode.
“On”
:
Makes the dark parts blacker with additional
contrast and brightness.
“Off”
:
Shows the original picture as recorded.
“On”
:
Activates noise reduction.
“Off”
:
Deactivates noise reduction.
Black Level
On
Noise Reduction
Off