Box with a/v outputs – Philips 37PF9631D-37B User Manual
Page 44
42
Connect a recorder and satellite receiver or Cable box with A/V outputs
Pb
Y
Pr
AUDIO
R
L
VIDEO
AV2
L
R
VIDEO
DIGITAL
AUDIO OUT
AV3
Pb
Y
Pr
AUDIO
R
L
VIDEO
AV1
S-VIDEO
ANTENNA
75
RECORDER
OUT
IN
AV1 / AV2 / AV3 :
L + R + VIDEO
4
3
2
OUT
IN
CABLE BOX
1
CABLE
1. Connect the satellite antenna cable or the Cable TV cable 1 to the satellite receiver’s or cable
box’s
IN
jack.
2. Connect the AV cables 2 to the satellite receiver’s or cable box’s
AV OUT
jacks and to the
recorder’s
AV IN
jacks.
3. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
VIDEO
,
AUDIO L
and
R
input
AV1, AV2
or
AV3
jacks on the TV.
4. Connect another RF cable 3 from the output out of your recorder to the TV’s input
CABLE/ANTENNA 75 Ω
x jack.
5. Select the equipment you have connected in the Setup menu, Select your source, p. 20 and link
it to the
AV
connector you have connected your equipment to.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO
input of
AV3
and connect
the audio cables to the
AUDIO L
and
R
input jacks of
AV3.
When using the
S-VIDEO
connector do not connect any device to the
AV3 VIDEO
jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.