Philips WAS7500-37 User Manual

Page 9

Advertising
background image

5

EN

C

D

Add a Station to the network of the Center:

On the Center:
1
Press

HOME

.

2 Press

3

or

4

, then

2

to select HD (Harddisk) mode.

3 Press

MENU

to enter the menu display.

4 Press

3

or

4

, then

2

to select Station Management (Mgnt).

5 Press

3

or

4

, then

2

to select Add New Station.

> The Center searches for the new Station.

On the Station:
1
Connect the Station to the power supply.

2 Turn on the Station.

• If you turn on the Station for the first time, press

3

or

4

, then

2

to select the language.

• If you already used the Station with a Center, press

MENU

, followed by

3

or

4

, then

2

to

select Installation Mode.

> The display shows: Center found

The display shows: Connecting to Center...

On the Center:
1
When all Stations are found, press

STOP

9

, to stop the search for Stations.

> The Center returns to HD mode.

To relocate a device, refer to the section Relocate a device in this guide.

If you do not have an Internet connection / PC...
Set up Center and Station without a network

You can operate the Center and Station without a network connection.The following steps show
you how to set up the Center and Station on their own for the first time.

1 Place Center and Station side by side on a level surface strong enough to support the devices.
2 Use the supplied power cables to connect first the Center, then the Station to the power supply.
3 Select the language on the Center and on the Station.
> The installation process starts.

The Center searches for Stations within range.

4 When the Center has detected all the Stations within range, press

STOP

9

on the Center to

stop the search.

> The Station registration process starts.

After the successful registration, the displays of the Center and all connected Stations show HD Music.

Relocate a connected device

1 Press and hold

y

to switch the device to Eco Standby.

2 Disconnect the device from the power supply.
3 Reconnect the device to the power supply in the new location.
> The Wi-Fi connection between the devices recovers automatically.

Tip For better Wi-Fi reception, rotate the Wi-Fi antenna or adjust the location of the Center
and the Station.

E

Advertising
This manual is related to the following products: