Philips 27PT6441-37B - Manual (Page 6)

TO TV/VCR
CABLE IN IR
USB
DVD-D OUT
AUDIO IN SPDIF VIDEO IN OUT
S-VIDEO R L
AUDIO OUT
TV PASSCARD
Y Pb Pr
OPTICAL SPDIF
4
24
ANT 75‰ L/Mono Monitor out VIDEO
S-VIDEO
AV1 in Y Pb Pr
AV2 in
AUDIO R COMPONENT VIDEO INPUT
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
5
6
C
ABLE
B
OX
C
ONNECTIONS 2
I f your cable signal uses a cable
box or decoder, follow the easy
steps below to complete the connec-
tion.
Cable Box (w/RF In/Outputs):
This connection will be mono.
1 Connect the Cable Company
supplied cable to the signal
IN(put) plug on the back of the
Cable Box.
2 Using a separate round coaxial
cable, connect one end to the
OUT(put) (TO TV) plug on the
back of the Cable Box.
3 Connect the other end of the
round coaxial cable to the 75 Ω
input on the back of the televi-
sion. Screw it down finger tight.
NOTE: If applicable, set the OUT-
PUT CHANNEL SWITCH on the
back of the cable box to CH 3 or 4.
Tune the TV to the same channel and
change channels at the cable box. In
some cases, the cable box will auto-
matically tune to either channel 3 or 4,
change channels until the picture
appears.
Cable Box (w/Audio/Video
Outputs):
This connection will supply Stereo
sound.
4 Connect the Cable Company
supplied cable to the cable sig-
nal IN(put) plug on the back of
the Cable Box.
5 Using a RCA type Video Cable,
connect one end of the cable to
the Video (or ANT, your cable
box may be labeled differently)
Out jack on the cable box and
the other end to the AV1 Video
Input on the TV.
6 Connect one end of the Audio
Left and Right Cable to the left
and right Audio Out L & R
jacks on the cable box. Connect
the other end to the AV1 Audio L
& R Input jacks on the TV.
NOTE: Use the AV button on the TV
remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable
box, not the television.
75 ⍀
TO TV/VCR
CABLE IN IR
USB
DVD-D OUT
AUDIO IN SPDIF VIDEO IN OUT
S-VIDEO R L
AUDIO OUT
TV PASSCARD
Y Pb Pr
OPTICAL SPDIF
1 2
3
ANT 75‰ L/Mono Monitor out VIDEO S-VIDEO
AV1 in Y Pb Pr
AV2 in AUDIO R COMPONENT VIDEO INPUT
Jack Panel Back of Cable Box
Cable Signal IN from the
Cable Company
Round 75 Ω
Coaxial Cable
Jack Panel Back of TV
Cable Signal IN
from the Cable
Company Cable Box with A/V Outputs
Jack Panel Back of TV
Audio Cables
L (White) & R (Red)
Video Cable
(Yellow)
Cable Box (w/RF In/Outputs):
Cable Box (w/Audio/Video Outputs):