Specifications, Highlights – Philips SPA4355-37 User Manual

Page 2

Advertising
background image

Specifications

SPA4355/37

Multimedia Speakers 2.1

5" large speaker

Highlights

SPD™ technology

Philips Sound Purification Duct (SPD) bass port

technology delivers the deep, pure tones of the

original bass sound. Using an SPD foam material to

process the inner surface of the bass pipe, the special

acoustic damping invented by Philips reduces noise

turbulence and stabilizes the tuning frequency. Philips

technical and consumer tests confirm this buffer

provides less colored, purer quality bass.

Well damped driver

A single speaker driver normally incurs a specific

frequency division vibration near the edge of the

diaphragm, often resulting in some sound distortion.

This way to overcome this problem by using Mylar, a

uniform monomer and a much lighter material that is

more usually used, around the driver cone.

Surrounding the cone in a perfectly symmetrical ring,

the resulting damping effect suppresses the

asynchronous vibration, resulting in a more balanced

and natural sound.

Bass Reflex Speakers

A chamber behind the speaker driver that channels air

to acoustically tuned vents built into the speaker give

the bass notes a more punchy, realistic sound.

AUX-in and headphone out

Now you can enjoy your favorite music and

entertainment even easier and more conveniently, via

the aux-in and headphone out jack on wired control.

Usually, if you want to connect another device other

than your PC you have to unplug the 3.5mm jack from

the computer and that is not always expedient. But

with the aux-in and headphone out connections on

front you can quickly and easily listen to music straight

from almost any device.

Audio systems

• Frequency range: 20Hz-20kHz

• Input impedance: 25Kohm

• Output power in total: 30W

• Power: 220V 50Hz

• Signal/Noise ratio: >75dB

• THD: <1%

Audio systems L/R channels

• Audio power amplifier: Class-AB Amplifier

• Channel separation: >45dB

• Input sensitivity: 450mV

• Rated output power: 6W x2

Subwoofer audio systems

• audio power amplifier: Class-AB Amplifier (BTL)

• Input sensitivity: 180mV

• Rated outputer power: 18W

Left/Right speakers

• Driver power range: 1-20Wx2

• Frequency range: 100Hz-18kHz

• Norminal impedance: 6ohm

• Sensitivity: 85dB(2.83V/1m)

• Speaker driver: 2.5" full range

Subwoofer speaker

• Driver power range: 2-60W

• Frequency range: 55Hz-250Hz

• Norminal impedance: 8ohm

• Sensitivity: 86dB(2.83V/1m)

• Speaker driver: 5"

Connectivity

• Cable length: 1.3m

• Connector: 3.5 mm stereo

• Audio input for data: Stereo Audio (3.5 mm jack) 1x

Power

• Power LED indicator: Amber

Convenience

• Remote control: Wired volume control

Packaging content

• Subwoofer

• 3.5 mm stereo line cable: Fixed

• Quick installation guide

• Remote Control: Wired

• Number of satellites: 2

Issue date 2014-03-29

Version: 3.0.2

12 NC: 8670 000 92207
EAN: 00 60958 52280 23

© 2014 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.

www.philips.com

Advertising