Philips SHB9100RD-00 - Manual (Page 2)

Turn the headset on. Press and hold for more than 4 seconds
Turn the headset off. Press and hold for more than 4 seconds
Play or pause music. Press
Pick up or terminate a call. Press
Reject a call. Press and hold
Redial the last number. Press twice
Switch caller in a call. Press twice
Transfer a call to your mobile phone.
(This function is available if your mobile
phone supports this feature.)
Press and hold for more than 4 seconds
Adjust volume. Slide up / down VOL +/-
Skip forward. Press
Skip backward. Press twice
Mute/unmute the microphone in a call. Press
Activate voice dialing Press twice
Use your headset
*Available if supported by your mobile phone.
The headset is connected to a Bluetooth
device, while the headset is in standby
mode or while you are listening to music.
Blue LED flashes every 8 seconds.
The headset is ready for pairing. LED flashes whiteand blue alternately.
The headset is on but not connected to a
Bluetooth device.
Blue LED flashes fast.
There is an incoming call. Blue LED flashes twice per second.
Low battery. White LED flashes.
Battery is fully charged. White LED flashes.
The LED is off. The headset is off./Charging is finished.
The headset beeps every 5 seconds The Mic is muted.
Other status and indicators
© 2012 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V2.0
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome