Philips HF3227-60 - Manual (Page 10)

9
Quick On
To turn the light source on or off, push LIGHT.
Timing a Session
To start a timed session, press TIMER. The timer display will flash. Select the desired
usage time by pressing the + or - button. After a three-second delay, the light source will
automatically turn on and begin counting down.
Changing the Session Time
To change the timer while the goLITE is on, press TIMER, then push the + or - button
to set the new desired time.
Changing the Intensity
While the light source is on, you can change light intensity by pushing the + or - button. You can choose
intensity settings in increments of 10%.
Cancel a Treatment
Press the “LIGHT” button at anytime to cancel a treatment.
Check Clock Time
To check the clock while unit is turned off, push the + button.
(Diagram 2)
Using your goLITE