Philips 740815008 - Manual (Page 24)

INSTALLATION / VENTILATE
Fill the coffee bean container
with coffee beans.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch
to “I” to turn on the
machine.
Insert the plug into a sui-
table electric socket.
See rating plate
Place a container beneath
the steam tube.
Press the button to
dispense water
Note: You must load the circuit
before starting up the machine
for the first time, if it has been
inoperative for a lengthy
period or if the water tank
has been completely emptied.
Moreover, the circuit must be
loaded every time the message
“VENTILATE” is displayed.
Now this message will also
be displayed
Turn the knob countercloc-
kwise to start loading the
circuit.
Wait until a steady stream
of water fl ows out from the
nozzle.
Turn the knob clockwise
to terminate the circuit-
loading process.
The machine is ready for
use.
Press the button again.
RINSING
WARMING UP ...
HOT WATER
WARMING UP ...
SELECT PRODUCT
READY FOR USE
RINSING
WARMING UP ...
Remove the container.
The display will indicate
that the machine is
warming up
RINSING
WARMING UP ...
24