Philips MC145-37 - Manual (Page 10)

10
English
MC138/17 English issue 1
Preparations
FM ANT
AC ~
110V
220V
FM antenna
AC power cord
Speaker
(right)
Speaker
(left)
Rear connections
The type plate is located at the back of the
system.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
B
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "
RIGHT" and left
speaker to " LEFT", coloured (marked) wire to
" +" and black (unmarked) wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of
+ / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
p001-024 MC145_37_Eng 6/2/06, 10:29 10