Philips 55PFL5505D-F7 - Manual (Page 13)

12
Switching channels
Press CHANNEL + / − on the side of the TV. For digital channels, press
a number (1 to 999) followed by a dot “.” and then the corresponding
sub channel number (1 to 999). e.g. 108.30.
•
Press CH + / − or enter a number on the remote control.
• Press PREV. CH to return to the previously viewed channel.
5 Use your TV
This section helps you perform basic TV operations.
Switching your TV on or to standby
To switch on
•
Press . POWER at the side of the TV or press . (Standby-On)
on the remote control.
To switch to standby
•
Press . POWER at the side of the TV or press . (Standby-On)
on the remote control again.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has a very low standby power
consumption.
EN
LC8(P&F)_master draft_EN_v1.indd 12 LC8(P&F)_master draft_EN_v1.indd 12 2010/01/18 17:36:01 2010/01/18 17:36:01