Turn on, Set time and date, Switch to standby mode – Philips AJ5300D-37 User Manual
Page 17
Advertising
Turn on
Press .
»
The clock radio switches to the last selected source.
Switch to standby mode
Press to switch the clock radio to standby mode.
»
The clock (if set) is displayed.
Set time and date
1 In standby mode, press and hold TIME SET on the back of your
clock radio for more than two seconds.
»
[12H] or [24H] begins to blink.
2 Press
/
repeatedly to select 12/24 hour format.
3 Press TIME SET to confirm.
»
The hour digits begin to blink.
4 Repeat steps 2-3 to set hour and minute.
Note
•
If clock is not manually set, when iPod/iPhone is connected, the unit
synchronizes time from the iPod/iPhone automatically.
Tip
•
The accuracy of the transmitted time depends on the docked iPod/
iPhone that transmits the time signal.
Advertising