Philips DS8300-37 - Manual (Page 12)

10 EN
• To disconnect Bluetooth
1
Turn off the connected device or move it
beyond the communication range.
» LED flashes.
• To erase Bluetooth paring information
1
Press and hold for 5 seconds.
» The unit beeps once after paring
information is cleared successfully.
Play audio files from Bluetooth
devices
Note
•
Make sure the Bluetooth connection between the unit
and the device is active.
• To start play, press on the remote
control.
• To pause/resume play, press again.
• To track up/down, press forward/backward
keys.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
• Make sure that no iPod/iPhone/iPad is docked in the
speaker.
1
Press to select audio-in mode.
2
Connect the supplied audio-in cable to:
• the AUDIO IN jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1
During play, press MUTE to mute/unmute
sound.