Philips HD8753-87 - Manual (Page 33)

31 ENGLISH 31
Y
ello
w
Gr
een
6 The following icon is displayed during pre-heating time required by
the machine.
7 The machine pours a pre-defi ned amount of hot milk into the cup. The
pouring can be stopped by pressing the “ ” button.
Note:
After using the milk carafe, clean it as described in the ‘Cleaning and Main-
tenance’ chapter.
Adjusting the hot milk lenght
Each time this function is selected, the machine pours a pre-set amount of
hot milk into the cup. The machine allows you to adjust the amount of hot
milk according to your taste and the size of your cups.
1 Fill the milk carafe with milk and install it into the machine.
2 Place a cup under the dispensing spout.
3 Press the “ ” button. The following icon is displayed.
4 Press and hold the “ ” button to select hot milk until the ‘MEMO’ icon
appears on the display. Then release the button. The machine is now in
programming.
Gr
een