Ooking up the – Philips 30PW6341-37 User Manual

Page 2

Advertising
background image

TO

TV/VCR

CABLE

IN

IR

USB

DVD-D OUT

AUDIO IN

SPDIF

VIDEO

IN OUT

S-VIDEO

R L

AUDIO OUT

TV

PASSCARD

Y Pb Pr

OPTICAL

SPDIF

4

24

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

6

5

2

H

OOKING UP THE

TV

1

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

Y

our Cable TV input into your home may be a single (75 ohm)
cable or use a cable box decoder. In either case the connec-

tion is very simple.
Follow the steps below to connect your cable signal to your new
television.

Direct Cable Connections:

This connection will supply Stereo sound to the TV.

1

Connect the open end of the round Cable Company sup-

plied cable to the 75

Ω input on the TV. Screw it down finger

tight.

Cable Box (w/RF In/Outputs):

This connection will NOT supply Stereo sound to the TV. The sound
from the cable box will be mono.

1

Connect the Cable Company supplied cable to the signal

(IN)put jack on the back of the cable box.

2

Using a separate round coaxial cable, connect one end to the

OUT(put) (TO TV) jack on the back of the Cable Box.

3

Connect the other end of the round coaxial cable to the
75

Ω input on the back of the television. Screw it down finger

tight.

NOTE: If applicable, set the OUTPUT CHANNEL SWITCH on the
back of the cable box to CH 3 or CH 4. Tune the TV to the same
channel and change channels at the cable box. In some cases the
cable box will automatically tune to either channel 3 or channel 4,
change channels until the picture appears.

Cable Box (w/Audio/Video Outputs):

This connection will supply Stereo sound to the TV.

4

Connect the Cable Company supplied cable to the cable

signal IN(put) jack on the back of the Cable Box.

5

Using an RCA type Video cable, connect one of the Video

Out jack (or ANT, your cable box may be labeled differently)
on the cable box. Connect the other end to the AV1 Video
Input jack on the TV.

6

Connect one end of the Audio Left and Right cables to the

Audio L & R Out jacks on the cable box and the other end to
the AV1 Audio L & R Input jacks on the TV.

NOTE: Use the Channel +, or – buttons on the TV remote control to
tune to the AV1 channel for the cable box signal. Once tuned, change
channels at the cable box, not the television.

D

IRECT

C

ABLE

C

ONNECTION

75

TO

TV/VCR

CABLE

IN

IR

USB

DVD-D OUT

AUDIO IN

SPDIF

VIDEO

IN OUT

S-VIDEO

R L

AUDIO OUT

TV

PASSCARD

Y Pb Pr

OPTICAL

SPDIF

1

2

3

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

Direct Cable Connection:

Cable Box with RF Inputs and Outputs Connection:

Cable signal

coming from

Cable Company

(Round 75

coaxial cable)

Jack Panel Back of TV

Jack Panel Back of Cable Box

Cable Signal IN from the Cable Company

Round 75

Coaxial Cable

Jack Panel Back of TV

A

combination antenna receives normal broadcast chan-
nels (VHF 2–13 and UHF 14–69). Your connection is

easy because there is only one 75

(ohm) antenna plug on

the back of your TV, and that’s where the antenna goes.

1

If your antenna has a round cable (75 ohm) on the end,

then you're ready to connect it to the TV.
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on a
300- to 75-ohm adapter.

2

Push the round end of the adapter (or antenna) onto the

75

Ω (ohm) plug on the back of the TV. If the round end of

the antenna wire is threaded, screw it down finger tight.

A

NTENNA

TV

1

2

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

Antenna Connection:

Jack Panel Back of TV

Round 75

Ω Coaxial

Cable from Antenna

Twin

Lead Wire

300 to 75-ohm

Adapter

Outdoor or Indoor Antenna

(Combination VHF/UHF)

The combination antenna receives normal

broadcast channels 2-13 (VHF) and 14-69 (UHF).

Cable Box with Audio/Video Outputs Connection:

Cable Signal IN

from the Cable

Company

Jack Panel Back

of Cable Box with A/V Outputs

Jack Panel Back of TV

Audio Cables

L & R (Red, White)

Video Cable (Yellow)

C

ABLE

/C

ABLE

B

OX

TV

Advertising
This manual is related to the following products: