Philips MCM275-37 - Manual (Page 26)

26
English
Timer SLEEP
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) star ts
playback at a preset time.
Make sure the
clock is set before using the timer.
1
Press and hold TIMER on the remote control
until
SET TIMER appears
➜
flashes.
SELECT SOURCE scrolls
➜
Display shows current source
CD, TUNER or
USB
2
Press SOURCE on the set repeatedly to select
the source (or press CD, TUNER or USB on
the remote control)
3
Press TIMER to confirm
➜
The hours digits start flashing
4
Hold down or press VOLUME +/- repeatedly
to set the hours (or turn VOLUME on the
set)
5
Press TIMER to confirm
➜ The minutes digits start flashing
6
Hold down or press VOLUME +/- repeatedly
to set the minutes (or turn VOLUME on the
set)
7
Press TIMER to confirm
➜
The timer is now set and activated
➜
At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 20)
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
● Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜
If activated, the last set source and star t time
are displayed
➜
If deactivated, “
TIMER OFF” appears
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB
SLEEP
You can set a cer tain period of time after which
the set will switch off.
●
On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜ Display shows in sequence: Sleep 90, 75,
60, 45, 30, 15
➜ Display shows the selected option briefly and
returns to its previous status. The icon
appears
To deactivate the sleep timer, press
SLEEP again
➜ The icon disappears
or
Press
STANDBY-ON to switch off the set (or
y on the remote control)
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
P001-P031_MCM275_37_Eng 12/20/2005, 09:40 26