Bushnell 11-9303 - Manual (Page 11)

11
Setup Guide (cont.)
Batteries typically last 30 days or more, depending on how often the Sentry is activated by events, how often the flash
fires, ambient temperature, etc. The red LED lamp will stay on continually to indicate a low battery condition.
9. Pressing the Up/Down buttons during normal operation will switch the display between showing # of photos
stored (i) and # of events recorded (j). To view your captured photos, make sure the power is off, and remove the SD
card by pushing down lightly on the top edge of the card-it will pop up for removal. Insert it into an SD card reader
(available at most computer, photo, or electronics dealers) connected via USB to your PC or Mac to view, copy, or
delete the photos (standard JPG files) and movies (AVI files) inside the “DCIM/100MEDIA” folder on the card.
Double click on an individual file to see it, or open the files using the photo software of your choice. The event log is
the .TXT file, just double click to view with your default software that opens standard plain text files. If you do not
have a computer, or would like to more easily view your photos in the field, we recommend the Bushnell Trail Scout
Viewer. It is battery powered, and features 2 SD card slots, allowing you to easily
copy photos to a larger capacity card, or delete unwanted photos, as well as view
your Sentry photos on its large color LCD display. The Trail Scout Viewer also has
a USB port, so it can function as a card reader for a computer as well.
j
i
119303 Trail Sentry manual-Engli11 11 2/13/07 12:19:07 AM