Philips 30PW8420-37 - Manual (Page 24)

24
Q
UADRASURF
™
T he Quadra Surf buttons on your remote control
allow you to store up to 10 channels per button
(40 total). You can even program the A/V Input
channels for each button making them a “source”
button.
Assuming channels have now been added to the
four Quadra Surf lists (the four colored buttons, see
the previous page), let’s review how the feature
works.
1 Press one of the pre-programmed COLORED
buttons
on the remote (Red, Green, Yellow or
Blue). The screen will display a smiley face with
the first programmed channel for that surf list.
2 While the colored “smiley” face still appears on
the screen, press the same COLORED button
on
the remote to tune the second channel programmed
for that specific surf list.
3 Repeatedly pressing the same COLORED but -
ton
while the “smiley” face appears will tune all
the programmed channels. Pressing the COLORED
button again will return you to the first channel
in the list.
If the “smiley” face disappears from the screen and the
same COLORED button is pressed, the surf channels will
be displayed starting with the FIRST programmed channel
again.
4 Repeat steps 1-3 for the other three COLORED
buttons (Surf lists) if desired.
5 Any time the “smiley” face appears with the chan-
nel number, pressing the “frownie” face button
will allow you to remove it from the list (see the
previous page for more details).
VOL
10
12
18
22
28
35 39
41
56
99
1
2
3
5
5
1 Your remote also has an A/CH (Alternate
Channel) button. Pressing this button will toggle
between the Current and one previously selected
channel.
A
LTERNATE
C
HANNEL
VOL
8
1
12