BT 7150 - Manual (Page 69)

No display appears
• The handset may be switched off.
• Press and release the button to switch the handset on.
• The batteries may be flat, dead or incorrectly inserted. Recharge, replace or renew the
batteries.
No dial tone
• Make sure your handset is registered to the base and within range of the base.
• Is the telephone cord of the base plugged into the phone socket?
• Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
• Does the display show Out of Range? If so, you are out of range of the base the handset
is registered to or power is off at the base.
• Batteries could be low or flat.
• If using more than one base station, check that you have the correct base selected.
Handset does not ring
• The ringer volume may be switched off (if it is there will be a icon on the display).
Press and hold to switch it off and on. To adjust the ringer volume on the handset,
see page 55.
69 Help
BT Freestyle 7150 – Edition 3.1 – 23.11.05 – 7130
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]