Philips DVD781CH99 - Manual (Page 31)

Audio Language/Sound Mode 31
• If a desired language is not shown
after pressing the o/p buttons sev-
eral times, the DVD does not have
that language.
• The display will disappear after
about 15 seconds. Or, press the
AUDIO button a second time and
the display will disappear automati-
cally.
• Some DVDs only allow you to
change the language in the Disc
menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode
of audio CDs cannot be changed.
Helpful Hints
The DVD Player allows you to select a Language for DVDs or a
Sound Mode for Audio CDs.
1
Press the AUDIO button during playback. Within 15 sec-
onds, press the o/p buttons to select the desired lan-
guage.
● The language can be changed only if multiple languages are avail-
able on the DVD.
1
Press the AUDIO button during playback, then press the
o
/p buttons until the sound mode you want appears.
● When producers record an Audio CD, they record the sound
on two channels - the left and the right. You can choose to hear
the sound on the left channel, the sound on the right channel,
or the sound on both channels (Stereo). You will select L-CH,
R-CH, or STEREO.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO BONJOUR
➜ •••
AUDIO 1 AUDIO 2
Only the right channel is active.
AUDIO R - C H
Only the left channel is active.
AUDIO L - C H
Both right and left channels
are active (stereo).
AUDIO S T E R E O
DVD
AUDIO CD
Language
Sound Mode
Press the o/p buttons.
Press the o/p buttons again.
Press the o/p buttons again.
AUDIO SUBTITLE ANGLE
CLEAR
REPEAT
+10
3
6
9
0
2
5
8
1
4
7
ENTER RETURN
SEARCH MODE
MODE
REV
STOP
PLAY
FWD
POWER
DISPLAY
SETUP
SKIP PAUSE
SLOW
DISC SELECT
A-B
TITLE MENU
1 2 3
DISC
DVD/CD 5-DISC
CHANGER
4 5
OPEN/CLOSE
1