Philips 15PF8946-37 - Manual (Page 15)

15
H
OW TO
C
LEAR ALL
L
OCKED
C
HANNELS AT THE
S
AME
T
IME
V arious onscreen messages will appear
when someone tries to view blocked pro-
gramming. The message is determined by how
the current programming is blocked. You may
view the blocked programming and turn OFF
the AutoLock™ feature by using the Clear All
control or by entering your access code.
1 Press the MENU button on the
remote control to show the onscreen
menu.
2 Press the CURSOR DOWN button to
highlight Features.
3 Press the CURSOR RIGHT button
to display the Features menu.
4 Press the CURSOR DOWN button to
select the AutoLock™ control.
5 Press the CURSOR RIGHT button
again to highlight Access Code.
6 Enter your four-digit Access Code,
“Correct will briefly appear on the
screen and the AutoLock menu will be
accessible.
7 Press the CURSOR RIGHT button
to enter the AutoLock menu.
8 Press the CURSOR DOWN button to
select Clear All. Clear? will appear on
the screen.
9 Press the CURSOR RIGHT button
to activate the clearing of all channels.
Press the STATUS/EXIT button to
remove the menu from the screen. 10
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
If you tune to a specific channel that has
been blocked by Block Channel or any of
the AutoLock™ Rating options, simply
enter your four-digit access code to view
the channel.
NOTE : This will unblock ALL channels
until the TV is shut OFF. When powered
back ON, all previously blocked channels
will be blocked again.
H
ELPFUL
H
INT
1
2
4
3
5
10
8
7
9
6
Features
Timer É
Autolock É
Contrast + É
Features
Timer É Access Code
Autolock
Contrast + Й
С Й – – – –
Features
Timer É Access Code
Autolock
Contrast + É
Correct
С Й
AutoLock
Block Channel
Clear?
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating Й
С Й
AutoLock
Block Channel
Cleared
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating Й
С Й
Active Control
Active Control É
Active Control Й
Й
Active Control Й
Й ****