Philips 7735X-43 - Manual (Page 18)

3 Replace razor head assembly. Cleaning
Important
◗ Always switch Razor OFF and remove from
charging stand before cleaning.
◗ Always store Razor with Protective Razor Head
Cap on shaving heads.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Never dry the shaving unit with a towel or
tissue as this may damage the razor heads.
Shaving Unit: Quick Clean After Every Shave
1 Make sure the razor is switched on.
2 Keep the Razor Head Assembly closed.
C
3 Rinse the Razor Head Assembly and the
hair chamber under a hot tap by letting
the water run through the openings below
the assembly for at least 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4 Shake off excess water.
ENGLISH
19
7735X DFU 11/19/03 4:29 PM Page 19 (Black plate)