3 get started, Charge the battery – Philips Portable DVD Player User Manual

Page 12

Advertising
background image

11

3 Get

started

Caution

Use the controls only as stated in this user manual.

Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your player. Find
the model number and serial number of this player at the back or the bottom of your player.
write these numbers here:
Model No. __________________________
Serial No. ___________________________

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage

printed on the bottom of the player.
Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

You can only charge the player when it is in power-off mode.

1

Slide the POWER ON/OFF switch to OFF position.

2

Connect the supplied AC adaptor to the player and to the AC outlet.

The charge indicator turns on. It takes about 4.5 hours to fully charge the

»

battery.

When the battery is fully charged, the charge indicator turns off.

»

English

EN

Advertising