Brother HL 5170DN - Manual (Page 18)

16
Installing the Driver
Connecting the printer to your network and installing the driver
1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Select the Network interface.
3
Turn off the printer power switch.
4
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5
Turn on the printer power switch.
6
Click the Next button when the movie
finishes.
7
Click the Install button.
For Network Interface Cable Users
For Brother Peer-to-Peer Network Printer Users
(LPR / NetBIOS)
■ If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
■ Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall
available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal
Firewall software.
Step 2