Philips FWC555 - Manual (Page 18)

P ROGRAMMING
You can program up to 40 tracks in any order in the memory.
1 Press PROG to create a new program.
2 Press CD and
w
or
∑
until you reach the desired track.
3 Press PROG to store the track.
4 Repeat steps 2-3 until all desired tracks are programmed.
● Press
7
to exit program mode without creating a program.
5 Press PLAY
3
to begin playback of the program. PLAY
PROGRAM appears on the display.
● The total playing time and the number of tracks appears each time
you program a track.
● If are track is number higher than 30 or the total playing time
exceeds 99:59, then - - : - - will appear instead of the playing time.
18 Programming Tracks
• If you press any of the DISC
DIRECT PLAY buttons, the sys-
tem temporarily ignores the pro-
grams. PROG disappears from
the display. It reappears when
playback of the selected disc is
finished.
Helpful Hint
R EVIEW THE PROGRAM
1 Press
7
to stop playback.
2 Press
w
or
∑
to review the tracks in the Program.
C LEARING THE PROGRAM
1 Press
7
twice during playback or once when playback is
stopped. PROGRAM CLEARED appears on the display.
● The program will also clear if the disc tray opens or the system
is disconnected from the power supply.
2
1
1
1,3
2
5