Troubleshooting – Philips MC120 User Manual
Page 21
21
English
3140 115 30091
RADIO RECEPTION
Radio reception is poor.
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
–
Increase the distance between the Micro HiFi
System and your TV or VCR.
TAPE OPERATION / RECORDING
Recording or playback cannot be made.
–
Clean deck parts, see “Maintenance”.
–
Use only normal (IEC I) tape for recording.
–
Apply a piece of adhesive tape over the missing
tab space.
GENERAL
The system does not react when buttons
–
Remove and reconnect the AC power plug and
are pressed.
switch on the system again.
Sound cannot be heard or is of poor
–
Adjust the volume.
quality.
–
Disconnect the headphones.
–
Check that the speakers are connected correctly.
–
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
–
Check the speaker connections and location.
reversed.
The remote control does not function
–
Select the source (CD or TUNER, for example)
properly.
before pressing the function button (
Й,н,л).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
–
Set the clock correctly.
–
Press TIMER ON•OFF to switch on the timer.
–
If a recording is in progress, stop the recording.
The Clock/Timer setting is erased.
–
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Troubleshooting