Philips BTM630-37B - Manual (Page 17)

English
17
CD/MP3-CD/WMA Operation
To find a passage within a track
1
Press and hold S / T on the system (or
5
/
6
on the remote control).
2
When you recognize the passage you want,
release S / T on the system (or
5 /6
on
the remote control).
➜
Normal playback continues.
To stop playback
● Press 9.
To interrupt playback
●
Press ÉÅ during playback.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
➜
To resume, press ÉÅ again.
Notes:
CD play will also stop when;
– you eject the disc.
– the disc has reached the end.
– you select another source: TUNER, BT
(Bluetooth), DOCK (iPod), USB, USB or CARD (SD/
MMC).
– you select standby.
– the set auto off time expires.
Playing an MP3/WMA disc
1
Load an MP3/WMA disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
2
Press ALBUM • PRESET +/- (or 3 / 4 on
the remote control) to select a desired album.
3
Press S / T on the system (or ¡ / ™ on the
remote control) to select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
S on the system (
¡ on the remote) or the
last track of an album by pressing T on the
system (
™ on the remote).
4
Press ÉÅ to start playback.
Supported MP3 disc formats:
– ISO9660, Joliet
– Maximum title number: 999 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
pg001-032_BTM630_37-Eng 2007.6.18, 11:43 17