Automatic power saving – Philips 107E2194 User Manual

Page 6

Advertising
background image

• Maximum display area

12.9" x 9.7" / 327 x 245 mm

SCANNING

• Horizontal scanning

30 - 70 KHz

• Vertical scanning

50 - 160 Hz

VIDEO

• Video dot rate

108 MHz

• Input impedance

- Video

75 ohm

- Sync

2.2 kOhm

• Input signal levels

0.7 Vpp

• Sync input signal

Separate sync

Composite sync

• Sync polarities

Positive and negative

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:

• at 9300 K degrees

x = 0.283 / y = 0.297

• at 6500 K degrees

x = 0.313 / y = 0.329

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the power
consumption and signaling of this automatic power saving features:

Power Management Definition

VESA's Mode

Video

H-sync

V-sync

Power Used

Power

Saving (%)

LED color

ON

Active

Yes

Yes

< 75W

0 %

Green

107E Product Information

file:///E|/Temp/temp/english/107E/product/product.htm (2 of 4) [6/12/2000 4:02:17 PM]

Advertising
This manual is related to the following products: