Philips MX6050D-37 - Manual (Page 26)

23
English
Disc Operations
Using the Disc Menu
Depending on the disc, a menu may appear
on the TV screen once you load in the disc.
To select a playback feature or item
●
Use the 1 2 3 4 keys or numeric
keypad (0-9) on the remote, then press
OK to start playback.
To access the menu
●
Press DISC MENU on the remote.
For VCDs with Playback Control
(PBC) feature (version 2.0 only)
●
During playback, pressing DISC MENU
will return to the menu screen (if PBC is
on.)
➜
Use S / T to select a play
option and press OK to confirm or use
the numeric keypad (0-9).
Basic playback controls
Pausing playback
●
Press ÉÅ.
➜
To resume normal playback, press
ÉÅ again.
Selecting another track/chapter
●
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number.
➜
If repeat mode is active, pressing S
/ T will replay the same track/chapter.
Searching backward/forward
●
Press and hold S / T, then press
ÉÅ to resume normal playback.
➜
While searching, pressing and holding
S / T again will increase the
search speed.
Stopping playback
●
Press Ç.
Resuming playback from the last
stopped point (DVD/VCD/CD)
●
When play is stopped and the disc has
not been ejected, press
RESUME.
To cancel the resume mode
●
When play is stopped, press Ç again.
Helpful Hints:
– Open the disc tray or disconnect the DVD
system from the power supply will cancel the
resume option.
– For VCD disc, pressing RESUME button will
turn off the PBC mode and playback will
start from the beginning.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.