Default settings – Brother BE-1201B-AC-PC User Manual
Page 162
6-42
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
Default Settings
Resets changes of the machine setting to the default.
!
Items for setting and initialization are as follows:
Speed Range
Automatically selects the value suitable for the hoop type.
Hoop Feed Position
Returns to the machine home position.
Embroidering Area
Sets the size each for the selected hoop.
Thread Trimming
Inching motion
Thread removal feed length
Thread remaining amount
Yes
15 mm (0.6 inch)
4
Thread Breakage Sensor
All sensors are on.
Sensitivity
10
Automatic Step Back
0
Thread Breakage
Sensor Sensitivity
Not affected by the thread breakage sensor sensitivity
Automatic Feed Hoop
No
Return to the start point
Yes
Mending
Automatically rest breakage error
No
Adjustment
0.0 mm for X direction
0.0 mm for Y direction
Main shaft speed up setting
Activating speed up of driving shaft
No
Hoop feed during temporary
stop
No
Reducing speed in a small
pitch
No
Thin
Feed speed
1
Thin / Thick material
Jog moving power up
No
Area Trace
"4 corner" is selected.