Dvd system menu options – Philips DVDR3390-37 User Manual
Page 54
English
54
TIPS:
Press W to go back to previous menu item.
Press
SYSTEM MENU to exit the menu item.
GENERAL settings
(underlined options are the factory default settings)
DVD System Menu Options
(continued)
Video Output
Format
The color system of the DVD system, DVD and TV should
match. Only then will it be possible to play a DVD on this
system. Before changing the TV system, determine the color
system of your TV.
1)
Use ST keys to select one of the options.
{
NTSC }
– Select this if the connected TV has the NTSC
color system. It will change the video signal of a
PAL disc and output it to NTSC format.
{
PAL }
– Select this if the connected TV has the PAL
color system. It will change the video signal of an
NTSC disc and output it to PAL format.
2)
Press OK to confi rm your selection.
Helpful
Hint:
– If a blank/distorted TV screen appears, wait for 15 seconds for the auto
recovery.
Restore Factory
Settings
This option will restore all the settings of this recorder, except
for the PIN code.
Restore Factory settings can only be changed when
there is no disc in the disc tray.
1)
Use ST keys to select this option and press
OK
to reset all settings.
2)
Select
OK
in the menu to proceed or
CANCEL
to abort, then
press
OK
to confi rm.