Philips Blu-ray Disc- DVD player BDP1200 - Manual (Page 15)

15 EN
2 Download the software into a USB storage device.
a Unzip the download, and make sure that the unzipped folder is named “UPG”.
b Put the “UPG” folder in the root directory.
3 Connect the USB storage device to the USB connector on the back of this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]> [USB].
» If an upgrade media is detected, you are prompted to start the update.
6 Follow the instructions on the TV screen to update the software.
» When the update is complete, this player automatically turns off and on again.
Caution
• Do not turn off the power or remove the USB storage device when the software
update is in progress because you might damage this player.
4 Specifications
Note
• Specifications are subject to change without notice
Region code
This player can play discs with the following region codes.
DVD Blu-ray Countries
USA and Canada
Playable media
• BD-Video
• DVD-Video,
• VCD/SVCD
• Audio CD
Video
• Signal system: PAL / NTSC
• HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080p/24Hz
A
English
BDP1200_F7_UM_V1.0.indb 15 1/26/2014 5:42:03 PM