Philips Sonicare FlexCare Platinum Rechargeable sonic toothbrush FlexCare Platinum HX9170-10 3 modes 3 intensities 2 brush heads With pressure sensor UV Brush Head Sanitizer - Manual (Page 11)

Battery status (when handle is not on charger)
- 1 yellow LED indicates a low charge.
- 3 green LEDs indicate a full charge.
Note: If you hear a long beep and the yellow LED of
the battery level indicator flashes, your Sonicare will
turn off until placed on the charger, where it will start
to recharge.
Note: To keep the battery fully charged at all times, you
may keep your Sonicare on the charger when not in use.
Features
Pressure Sensor
This Sonicare model comes with the Pressure
Sensor feature activated. The Pressure Sensor works
in all 3 modes and at all 3 intensity levels.
To deactivate or reactivate the Pressure Sensor feature:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitizer.
2 Press and hold the power button and the
mode button for 2 seconds.
, You hear 1 beep to indicate the Pressure Sensor
has been deactivated.
, You hear 2 beeps to indicate the Pressure
Sensor has been activated.
Quadpacer
- The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush
the 4 sections of your mouth. Depending on the
brushing mode you have selected, the Quadpacer
beeps at different intervals during the brushing
cycle. The Quadpacer works in all 3 modes and at
all 3 intensity levels.
ENGLISH 11