Bushnell 78-6114 - Manual (Page 6)

FINDING OBJECTS
1. Loosen the altitude locks on the sides of the telescope tube and the silver azimuth lock on the
base of the altazimuth mount, then move the telescope in the desired direction.
2. Look through the finderscope and pan the telescope until the object appears in the field of view.
Once it's in the field of view, tighten the altitude and azimuth locks.
FOCUSING
1. Once you have found an object in the telescope, turn the focus knob until the image is sharp.
2. To focus on an object that is nearer than your current target, turn the focusing knob toward the
eyepiece (i.e., so that the focus tube moves away from the front of the telescope). For more
distant objects, turn the focus knob in the opposite direction.
3. To achieve a truly sharp focus, never look through glass windows or across objects that produce
heat waves, such as asphalt parking lots.
MAGNIFICATION
1. The magnification (or power) of a telescope varies depending upon the focal length of the
eyepiece being used and the focal length of the telescope.
2. To calculate magnification, use the following formula, in which FL = focal length:
Magnification = FL (telescope) in mm
FL (eyepiece)
TECHNICAL SPECIFICATIONS
Objective Diameter: 114mm (4.5”)
Focal Length: 500mm
Eyepieces: H20mm (Low Power)
H12.5mm (High Power)
Erecting Eyepiece: 1.5X
Barlow: 3X
Maximum Magnification: 120X
Accessories: Finderscope, moon
map, astronomy CD
EYE LENS CHART & THEORETICAL POWER LIMITS
H12.5mm Eye Lens Power: 40X
H20mm Eye Lens Power: 25X
NOTE: Magnification is calculated magnification.
Low power is recommended for most viewing conditions.
QVC 78-6114 Telescope 1LIM.indd 6
9/6/2006 3:02:26 PM