Philips HTS3531-F7 - Manual (Page 18)

16 EN
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
• Most of the settings are already configured with
the best value for your home theater. Unless you
have a reason to change a setting, it is best to
leave it at the default value.
Note
• You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK. To exit the menu, press SETUP.
Picture
Change the picture settings to suit your
preferences.
Note
• The best setting is automatically selected for the
TV. If you change the setting, make sure that the
TV supports the new settings.
Picture settings and format
1
Press SETUP.
2
Select [Video Setup], and then press OK.
3
Change the following settings, and then press
OK:
• [TV System]: For TV supported video
format.
• [TV Display]: For TV picture display
format.
• [Picture Settings]: Predefined color
settings.
Picture resolution
To enjoy high definition HDMI video output, set
the HDMI video settings that best match up with
your TV capability.
1
Press SETUP.
2
Select [Video Setup], and then press OK.
3
Select [HDMI Setup], and then press OK.
4
Change the following settings, and then press
OK:
• [Wide Screen Format]: For 16:9 wide
screen TV display setting.
• [HDMI Video]: HDMI resolution.
High definition picture
Support high definition JPEG pictures.
1
Press SETUP.
2
Select [Video Setup], and then press OK.
3
Select [HD JPEG] > [On], and then press
OK.
Sound
Change the sound settings to suit your preference.
HDMI audio
HDMI audio is automatically down-mixed to two
channel for TV speakers. If you do not want to
output audio through your TV, disable the HDMI
audio.
1
Press SETUP.
2
Select [Audio Setup], and then press OK.
3
Select [HDMI Audio] > [Off], and then press
OK.