Boiler descaling cycle menu – Philips 10003278 User Manual

Page 42

Advertising
background image

35

ESC

OK

2.5. MAINTENANCE SETTING

PRODUCT COUNTERS

DESCALING CYCLE 59(I

BREW GROUP CLEANING CY

CARAFE WASH CYCLE

CARAFE AUTO CLEAN

1

REFILL WATER TANK

WITH DESCALING SOLUT

OK

3

ESC

OK

2.5.2. MAINTENANCE SETTI

START DESCALING

CYCLE?

2

Select the menu option.
1SFTTUIF0,CVUUPOUPDPOöSN

3FöMMXBUFSUBOLXJUIEFTDBMJOHTPMVUJPO
1SFTTUIF0,CVUUPOUPDPOöSN

Warning: Once this selection is made, the
XIPMFDZDMFXJMMIBWFUPCFDPNQMFUFE
1SFTTUIF0,CVUUPOUPDPOöSNPS&4$
to exit

BOILER DESCALING CYCLE MENU

%FTDBMJOHTIPVMECFQFSGPSNFEFWFSZNPOUITPSXIFOUIFNBDIJOFEJTQMBZTUIFSFMFWBOUNFTTBHF5IFNBDIJOFNVTUCFPOUPQFSGPSN
UIJTDZDMFJUBVUPNBUJDBMMZDPOUSPMTUIFEJTUSJCVUJPOPGUIFEFTDBMJOHTPMVUJPO

DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALING SOLUTION.

Only use the Saeco descaling solution, especially designed to respect the technical features of the machine, to ensure its performance
XJMMOPUEFDSFBTFXJUIUJNF BOEGPSBTBGFBOESJTLGSFFVTF5IFEFTDBMJOHTPMVUJPOJTUPCFEJTQPTFEPGBDDPSEJOHUPUIFNBOVGBDUVSFST
instructions and/or regulations in force in the country of use.

Note: Before starting a descaling cycle make sure that:

1. THE INTENZA WATER FILTER HAS BEEN REMOVED
 "DPOUBJOFSPGBEFRVBUFTJ[FPSBDPVQMFPGDPOUBJOFSTBSFBWBJMBCMFBOEBSFQMBDFEJOUIFQPJOUTJEFOUJöFE

DESCALING AND/OR RINSE CYCLES CANNOT BE STOPPED; ALL THE PHASES MUST BE COMPLETED. IF THE MACHINE IS
SWITCHED OFF OR IN CASE OF POWER FAILURES, THE INTERRUPTED CYCLE MUST BE REPEATED FROM THE BEGINNING.

HOWEVER, CYCLES MAY BE PAUSED BY PRESSING THE "PAUSE" BUTTON; IT WILL BE POSSIBLE TO RESUME THE CYCLE AT
ANY TIME BY PRESSING THE "START" BUTTON.

TURN THE SBS DIAL ALL THE WAY TO THE LEFT, COUNTER-CLOCKWISE (SEE PAGE 11), BEFORE STARTING THE CYCLE.

5PDPSSFDUMZQSFQBSFUIFEFTDBMJOHTPMVUJPO QPVSUIFFOUJSFDPOUFOUPGUIF4BFDPDPODFOUSBUFEEFTDBMJOHTPMVUJPOJOUPUIFXBUFSUBOL BOE
UIFOöMMUIFUBOLXJUIGSFTIXBUFSVQUPUIF."9MFWFM

Note: During the descaling cycle, some alarm messages may appear to allow for a correct management of the machine.

After resetting the message, always press the "START" button to resume the descaling cycle.

Advertising