Beltronics Sti Magnum - Manual (Page 10)

Brightness
BrtAuto
In this setting, the brightness for the display
and backlit buttons are controlled
automatically by a sensor that measures the
ambient light in the vehicle. Sunlight will
increase the brightness level, while dim or
no light (night driving) will decrease the
brightness.
BrtMin
In this setting, the display and backlit
buttons are set to a minimum light level.
This setting is retained in memory even if
the power is turned off.
BrtMed
In this setting, the display and backlit
buttons are set to a medium light level. This
setting is retained in memory even if the
power is turned off.
BrtMax
In this setting, the display and backlit
buttons are set to a maximum light level.
This setting is retained in memory even if
the power is turned off.
BrtDark
In this setting, the display and backlit
buttons will be totally dark. The supplied
SmartPlug will provide the only visual
indication that the STi MAGNUM is
operational.
16
Details of Programming
Features and Specifications
Operating Bands
• X-band 10.525 GHz ±25 MHz
• K-band 24.150 GHz ±100 MHz
• Ka-band 34.700 GHz ±1300 MHz
• Laser 904nm, ±33nm
Radar Receiver
• Dual-Horn Antenna Casting
• Superheterodyne, dual LNA’s
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• (5) Optical Laser Sensors
Display Type
• 280 LED Alphanumeric
• Bar Graph, Threat Display™ or Tech Display™
• Automatic, plus 4 levels of fixed brightness
including full Dark
Power Requirement
• 12VDC, Negative Ground
• Coiled SmartPlug™
with Mute Button (included)
Programmable Features
• Display
• Power-On Indication
• Alert Lamp
• Voice Alerts
• Power-On Sequence
• Signal Strength Meter
• AutoMute
• Display Brightness
• Bands
Sensitivity Control
• AutoScan
• Highway
• City
• CityNoX
Additional Patented Technology
• Auto Calibration Circuitry
• Mute / AutoMute™ / SmartMute™
• TotalShield™ Technology
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
17
Technical Details
Bands
BandsDFT
In this setting, the factory default settings
for radar and laser are monitored.
This is the factory setting, and it is
highly recommended that you use your STi
MAGNUM in this mode.
BandsMOD
In this setting, STi MAGNUM will warn you
with an audible alert, and associated text
message stating which band has changed
from the original factory setting (i.e. “SWS
ON”). This warning is displayed during the
start up sequence (standard or fast).
WARNING: Do not turn off a band unless
you are absolutely certain that there are
no traffic radar guns using that specific
band in your area.