Blaupunkt Arizona DJ73 - Manual (Page 32)

61
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
External audio sources
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output. The
audio source can, for example, be a
portable CD player, MiniDisc player or
MP3 player.
The AUX input must be activated in the
setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
➮
Press the MENU button
8
.
➮
Press the softkey
4
assigned to
the “SETP” display item.
➮
Press the softkey
4
assigned to
the “AUX1” or “AUX2” display item
for the input that you want to switch
on/off.
The AUX menu is displayed.
Note:
If a CD changer is connected, you can-
not change the “AUX1” input.
➮
Press the softkey
4
assigned to
the “ON” or “OFF” display item to
switch the input on/off.
Note:
If the AUX input is switched on it can be
selected by pressing the SOURCE but-
ton
;
.
EXTERNAL AUDIO SOURCES SPECIFICATIONS
Specifications
Amplifier
Output power: 4 x 26 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
Tuner
Wavebands:
FM
: 87.5 – 108 MHz
MW : 531 – 1,602 kHz
LW : 153 – 279 kHz
FM frequency response:
30 - 16,000 Hz
Cassette
Frequency response:
30 - 20,000 Hz
Pre-amp out
4 channels: 4 V / 10 k Ω
AUX input
Input sensitivity: 1.2 V / 10 k Ω
Subject to changes!