BT 1000 - Manual (Page 45)

Connecting to a
switchboard
When connecting your Synergy Handset to a
switchboard/PBX, you may need to change the dialling
mode setting from Time Break Recall (
TB ) to Earth
Recall ( E ).
To switch between Time Break Recall and Earth
Recall
The original setting is Time Break Recall.
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows
HANDSET.
• Press the ➔ button. Display shows
BASE.
• Press the ✔ button. Display shows
SECURITY PIN.
• Press the ➔ button until the display shows
RECALL.
• Press the ✔ button. Display shows the current setting
TB (or E).
• Press the ➔ button to display the alternative option.
Display shows
E (or TB).
• Press the ✔ button. You hear a confirmation beep.
Display shows
RECALL.
Press the
✗
button to reverse one step of the instructions.
Or press and hold to revert quickly to standby.
41